3 Ways to Patch an Exhaust Pipe - wikiHow (2024)

Download Article

Explore this Article

methods

1Locating the Exhaust Leak

2Sealing a Leak with Repair Epoxy or Exhaust Tape

3Using a Patch to Help Seal Leaks

Other Sections

Video

Related Articles

Expert Interview

References

Article Summary

Co-authored byJason Shackelford

Last Updated: January 4, 2024Approved

Download Article

An exhaust leak can create a great deal of noise, increase your emissions and cause the check engine light in your vehicle to come on. Extensive leaks can fill the cabin of your vehicle with carbon monoxide, which can make you feel sick or even fall asleep while driving. While extensive rusting or rotting of your exhaust system will require replacing all or parts of it, small leaks can be resolved using exhaust tape or epoxy. You can even make a patch out of soda or beer cans.

Get Car Support Solve Any Problem

3 Ways to Patch an Exhaust Pipe - wikiHow (3)

Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!

*

*

Method 1

Method 1 of 3:

Locating the Exhaust Leak

Download Article

  1. 1

    Park the vehicle on a level, firm surface. In order to repair the exhaust leak, you will need to jack the vehicle up to locate it. When you jack up a portion of the car, the weight of that portion will be centralized into the relatively small space beneath the jack. It's important that you choose a surface that can support that weight. You also need the surface to be level, as it's extremely unsafe to jack up a car at an angle.[1]

    • Black top or concrete are acceptable surfaces to jack up a car.
    • Never jack up a car on grass, dirt or gravel as it may cause the jack to topple over.
  2. 2

    Allow the exhaust to cool. The exhaust piping in your vehicle can reach extremely high temperatures while the engine is running. Allow the vehicle to cool for a few hours before attempting to work on the exhaust to avoid burning yourself.[2]

    • It may take a number of hours to allow the exhaust to cool enough to touch.
    • Touch the hood of your car. If it is still warm, the engine and exhaust are both still extremely hot.

    Advertisement

  3. 3

    Jack up the vehicle. Slide a scissor or trolley jack below the vehicle at one of its designated jack points. If you are unsure where these jack points are, refer to the vehicle's owner's manual to help you locate them. With the jack in the correct space, jack up the car until it is high enough to safely work beneath it.[3]

    • Once the vehicle is jacked up, place jack stands beneath the vehicle to support its weight.
    • Never work beneath a vehicle supported only by a jack.
  4. 4

    Inspect the exhaust piping. From beneath the vehicle, inspect the exhaust piping starting at the front of the vehicle and working your way back. If you have an idea of where the leak may be, you can begin your inspection in that area. Look for signs of damage such as scrapes, rust, cracks or holes.[4]

    • In lower vehicles, exhaust leaks can be caused by the underside of the vehicle bottoming out on things like speed bumps or pot holes.
    • Rust is also a common cause of exhaust leaks. If rust penetrates through all the way through a pipe, it will result in a leak.
    • Cracks in the piping are another common cause of exhaust leaks.
  5. 5

    Start the vehicle to help locate leaks. If you are unable to readily identify the source of the leak with a visual inspection, have a friend start the vehicle. From beneath the car or truck you should be able to spot the leak as puffs of exhaust smoke escapes from it.[5]

    • Be extremely careful working under a vehicle that is running. Keep your hands away from any moving parts.
    • Make sure the vehicle is in park (for automatic transmissions) or is in neutral with the wheels chocked (standard transmissions) before starting it.
  6. 6

    Assess the extent and type of damage. Depending on the type of damage you identify on your exhaust piping, your repair options may vary. If the exhaust piping is covered in extensive rust, that entire component of the exhaust may need to be replaced by a professional. Small scrapes or holes can be addressed without cutting out portions of the exhaust.[6]

    • Small holes may be repaired using exhaust tape or repair putty.
    • Larger holes will need a piece of aluminum in conjunction with an epoxy to seal.
  7. Advertisement

Method 2

Method 2 of 3:

Sealing a Leak with Repair Epoxy or Exhaust Tape

Download Article

  1. 1

    Scrub the area surrounding the leak with a steel toothed brush. Because the exhaust is located on the underside of the vehicle, it often gets caked with mud, dirt and rust. Once you locate the leak, use a steel toothed brush to scrub the area surrounding it. Most repairs will not stick or seal if done over dirt and grime.[7]

    • Scrub the entire portion of the pipe around the leak, including the top side if you can reach it.
    • Make sure to wear eye protection while scrubbing the area to prevent debris from getting in your eyes.
  2. 2

    Use sandpaper to prepare the surface of the pipe. Once you have scraped off most of the dirt and grime, take a piece of fine grit sandpaper and use it to scrub the portion of the pipe you need to repair. Sandpaper will remove the last bits of dirt as well as creating tiny micro abrasions in the metal to help the tape or epoxy adhere to it.[8]

    • If you are using exhaust tape, make sure to scrub the pipe all the way around with the sand paper.
    • Roughing up the surface of the metal will create a stronger bond for the patch.
  3. 3

    Wipe the surface down with acetone. Once you have brushed and sanded the pipe around the leak, wipe the area down with acetone to clean it and help the exhaust epoxy bond to the metal. Acetone is the primary ingredient in nail polish remover, so using nail polish remover will work well for this purpose.[9]

    • Be very careful not to drip acetone into your eyes or mouth while wiping down the pipe with it.
    • You can purchase acetone in the cleaning chemicals section of many retail stores, or nail polish remover in the health and beauty sections.
  4. 4

    Determine if the hole is small enough to be sealed without a patch. Small cracks or pinholes can be sealed using just epoxy or exhaust tape, but larger holes will need a patch. If the leak is a thin crack or small hole, you can proceed without purchasing or making a patch to help. If the hole is larger, you will need a patch as well as epoxy.[10]

    • Attempting to seal too large a hole without a patch can result in an imperfect seal or the exhaust leak resurfacing after a few hours of driving.
  5. 5

    Wrap the exhaust tape around the pipe. If you are using exhaust repair tape, wrap it all the way around the pipe, covering the exhaust leak with at least two layers of tape. Make sure to wrap the tape around the pipe for a few inches to either side of the leak as well. Different kinds of exhaust repair tape will require different application methods, so be sure to read the instructions thoroughly before you begin.[11]

    • Some exhaust repair tape must be applied to warm pipes in order to establish a seal, so you may need to start the vehicle and let it run for a few minutes before applying.
    • Other forms of exhaust repair tape needs to be wet before applying.
    • You can purchase exhaust repair tape at most auto parts stores.
  6. 6

    Mix the epoxy together and apply it to the leak. If you are using epoxy to seal the leak, mix the two parts together using a wooden dowel. Once the two parts are mixed, it will begin to cure immediately, so apply it to the leak quickly. Dab the epoxy over the leak, then use the wooden dowel to spread it around the area. Leave a thick layer of epoxy over and around the leak.[12]

    • You may also choose to wrap the leak in exhaust repair tape after applying the epoxy.
    • Different types of epoxy have different curing rates, so read the instructions on the package to know how long to allow it to sit before driving the vehicle.
  7. Advertisement

Method 3

Method 3 of 3:

Using a Patch to Help Seal Leaks

Download Article

  1. 1

    Determine the size of patch needed. You can purchase exhaust patch kits from your local auto parts store, but cutting up a piece of an aluminum can will actually do just as good as job at serving as a patch for a larger exhaust leak. After scrubbing and cleaning the area, determine how large the patch will need to be to cover the leak and leave at least a half inch or so of extra material beyond the hole itself.[13]

    • If the area that needs to be patched is larger than about three inches, that portion of the exhaust will likely need to be replaced.
    • If you purchase a patch kit, make sure to read the directions to assess the size of a leak the kit can fix.
  2. 2

    Cut an aluminum patch to fit over the leak. Use a pair of heavy duty scissors to cut your aluminum can into a patch large enough to cover the leak. You may also choose to wrap the can around the pipe. For smaller leaks, you can simply cut a circle of aluminum that is a half inch larger in diameter than the hole.[14]

    • You may want to wear gloves while cutting a can or aluminum patch to avoid being cut by sharp edges.
    • Wrapping the can or patch all the way around the pipe will provide the best seal.
  3. 3

    Cover the area surrounding the leak with epoxy. Just as you would seal a leak with epoxy, mix it together and apply it to the pipe around the leak. Make sure to apply enough epoxy to create a seal for the patch, but don't apply so much that the epoxy begins to drip into the exhaust piping.[15]

    • Apply the epoxy to an area surrounding the leak that is equal size to the patch you are applying.
    • If you are going to wrap the patch all the way around the pipe, apply most of the epoxy to the area around the leak and a lighter coat all the way around the pipe.
  4. 4

    Place the patch over the leak. Either place the small patch directly over the hole or wrap a large patch all the way around the pipe. If wrapping the patch around the pipe, make sure the middle of the patch is over the leak itself.[16]

    • It's okay if some of the epoxy squeezes out the sides of the patch when you apply it.
    • Make sure none of the leak extends beyond the sides of the patch.
  5. 5

    Apply epoxy over the patch. Use a wooden dowel to apply more epoxy to the edges of the patch. You may even choose to coat the patch itself with epoxy. This will help hold the patch in place as the epoxy dries while also creating a more solid seal to prevent any exhaust from leaking.[17]

    • Make sure to coat the perimeter of the patch with epoxy at the least to ensure there are no pinhole leaks.
    • If you wrapped the entire pipe with a patch, you do not need to coat the entire patch, but pay special attention to wear the patch meets on the opposite side of the pipe from the leak.
  6. 6

    Secure a large patch in place with hose clamps. If you wrapped the patch all the way around the pipe, use two hose clamps to secure it in place and ensure a tight seal. Place one hose clamp on either side of the leak on the pipe, then use a socket wrench or flat head screw driver to tighten the clamps into place over the patch.[18]

    • The hose clamps will help ensure a tight seal along with the patch and epoxy.
    • You may want to clip the excess ends off of the hose clamps once you are done.
  7. Advertisement

Community Q&A

Search

Add New Question

  • Question

    Can you drive a car with an exhaust leak?

    3 Ways to Patch an Exhaust Pipe - wikiHow (25)

    wikiHow Staff Editor
    Staff Answer

    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

    3 Ways to Patch an Exhaust Pipe - wikiHow (26)

    wikiHow Staff Editor

    Staff Answer

    It is not advisable to drive a car with an exhaust leak because the exhaust fumes are toxic and may be leaking into your car; carbon monoxide poisoning is deadly and you cannot smell or sense its presence. Moreover, your car’s fuel efficiency will drop markedly and if the exhaust pipe is making loud noises, and you live in an area where the police can give you a citation for causing pollution, you might get cited. And leaking exhaust can also wreck the catalytic convertor, which is very expensive to replace. So, in a nutshell, don’t drive a car with an exhaust leak––instead, get it repaired quickly!

    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHow

    YesNo

    Not Helpful 2Helpful 3

  • Question

    How much does it cost to fix an exhaust leak in a car?

    3 Ways to Patch an Exhaust Pipe - wikiHow (27)

    wikiHow Staff Editor
    Staff Answer

    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

    3 Ways to Patch an Exhaust Pipe - wikiHow (28)

    wikiHow Staff Editor

    Staff Answer

    On average, the cost will be around $200 to $400 but it really depends on the labor costs, the make of car and what sort of replacement parts are needed. Talk to your local mechanic to get an accurate figure for your particular problem.

    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHow

    YesNo

    Not Helpful 3Helpful 1

  • Question

    How much does it cost to fix a broken exhaust pipe?

    3 Ways to Patch an Exhaust Pipe - wikiHow (29)

    wikiHow Staff Editor
    Staff Answer

    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

    3 Ways to Patch an Exhaust Pipe - wikiHow (30)

    wikiHow Staff Editor

    Staff Answer

    The answer will depend on what damage needs fixing, how much of the pipe needs replacing, and whether or not you’re doing it yourself or having a mechanic fix it (the latter being what most people will require). You’ll need to factor in the cost of the materials, the labor and any additional warranty. Also, you may need to account for the car being at the mechanic’s for a day or so, which might entail paying for other transportation. That said, the cost can range anywhere from $50.00 to $800.00, depending on the car make, where you have it fixed and what exactly needs fixing. If a turbocharger or catalytic convertor is part of what needs repairing or replacing, expect the cost to go over $1000.

    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHow

    YesNo

    Not Helpful 0Helpful 2

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

      Advertisement

      Video

      Tips

      Submit a Tip

      All tip submissions are carefully reviewed before being published

      Name

      Please provide your name and last initial

      Submit

      Thanks for submitting a tip for review!

      You Might Also Like

      How toInstall an Exhaust SystemHow toKnow When a Muffler Is Broken
      How toClean Exhaust ManifoldsHow toSiphon GasStep-by-Step Methods for Adjusting a CarburetorHow toChange a Fuel FilterHow toTest Fuel InjectorsHow toReplace a Catalytic ConverterHow to Replace the Fuel Injectors in Your VehicleHow toCheck Your Fuel PumpHas Your Catalytic Converter Been Stolen? How to Tell and What to Do If It Has BeenHow toClean a Fuel FilterHow toReplace a MufflerWhat Causes White Smoke from Your Muffler (or Engine Bay)?

      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about car maintenance and repair, check out our in-depth interview with Jason Shackelford.

      More References (9)

      About This Article

      3 Ways to Patch an Exhaust Pipe - wikiHow (46)

      Co-authored by:

      Jason Shackelford

      Auto Technician

      This article was co-authored by Jason Shackelford. Jason Shackelford is the Owner of Stingray Auto Repair, a family owned and operated auto repair shop with locations in Seattle and Redmond, Washington. He has over 24 years of experience in auto repair and services, and every single technician on Jason’s team has more than 10 years of experience. This article has been viewed 564,352 times.

      5 votes - 80%

      Co-authors: 14

      Updated: January 4, 2024

      Views:564,352

      Categories: Exhaust and Fuel Parts

      Article SummaryX

      To patch an exhaust pipe, start by jacking up your vehicle so you can inspect the exhaust pipe and locate the leak. Next, scrub the area around the leak with a steel-toothed brush, sand the surface of the pipe to rough up the metal, and wipe the pipe down with acetone. Then, wrap the exhaust tape around the pipe, covering the leak with at least two layers. Finally, mix the epoxy together, apply it to the leak with a wooden dowel, and let the mixture cure completely before driving your vehicle. For tips on sealing a leak with a patch, read on!

      Did this summary help you?

      In other languages

      Spanish

      Russian

      French

      Hindi

      • Print
      • Send fan mail to authors

      Thanks to all authors for creating a page that has been read 564,352 times.

      Reader Success Stories

      • 3 Ways to Patch an Exhaust Pipe - wikiHow (47)

        Ronan Marshall

        May 15, 2017

        "I had never done a repair, and read/watched from start to finish. It helped me to locate two leaks: one was a weld..." more

      More reader storiesHide reader stories

      Did this article help you?

      Advertisement

      3 Ways to Patch an Exhaust Pipe - wikiHow (2024)

      References

      Top Articles
      Latest Posts
      Recommended Articles
      Article information

      Author: Ms. Lucile Johns

      Last Updated:

      Views: 6822

      Rating: 4 / 5 (61 voted)

      Reviews: 84% of readers found this page helpful

      Author information

      Name: Ms. Lucile Johns

      Birthday: 1999-11-16

      Address: Suite 237 56046 Walsh Coves, West Enid, VT 46557

      Phone: +59115435987187

      Job: Education Supervisor

      Hobby: Genealogy, Stone skipping, Skydiving, Nordic skating, Couponing, Coloring, Gardening

      Introduction: My name is Ms. Lucile Johns, I am a successful, friendly, friendly, homely, adventurous, handsome, delightful person who loves writing and wants to share my knowledge and understanding with you.